© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 7
Specifications Description
Receiver sensitivity
●
802.11b: 11 Mbps @ –86 dBm
●
802.11g: 54 Mbps @ –71 dBm
●
802.11n: 300 Mbps @ –64 dBm
Wireless Distribution System
(WDS)
Yes
Roaming Yes
Multiple SSIDs 4
Wireless VLAN map Yes
WLAN security Yes
WMM Yes, with unscheduled automatic power save and voice profile
Operating Modes
Access point Access Point mode, WDS bridging, Workgroup Bridge mode
Environmental
Power 12V, 0.5A DC input, and IEEE802.3af compliant PoE
Certifications FCC class B, CE, IC, Wi-Fi
Operating temperature 0° to 40°C (32° to 104°F)
Storage temperature –20° to 70°C (–4° to 158°F)
Operating humidity 10% to 85% noncondensing
Storage humidity 5% to 90% noncondensing
Mean time between failures
(MTBF)
531189 hours
Package Contents
●
Cisco WAP121 Wireless-N Access Point with Single Point Setup
●
Ceiling/wall mounting kit
●
User guide on CD-ROM
●
Quick-start guide
●
Ethernet network cable
●
12V, 0.5A power supply
Minimum Requirements
●
802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
●
Switch/router with PoE support or PoE injector when used with PoE
●
Web-based configuration: Java-enabled web browser
Warranty
Access point Limited lifetime
Power supply 1-year warranty
To Next Page
Loading...
