© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 7
Specifications Description
Security
WPA/WPA2/WEP Yes, including Enterprise authentication
Access control Yes, management access control list (ACL) plus MAC ACL
Secure management HTTPS
Wi-Fi Protected Setup (WPS) Yes (soft WPS, no hardware push button)
SSID broadcast Yes
Rogue access point detection Yes
Mounting and Physical Security
Multiple mounting options Desktop installation; mounting bracket included for easy ceiling or wall mounting
Physical security lock Kensington lock slot
Quality of Service
QoS Wi-Fi Multimedia & Traffic Specification (WMM TSPEC)
Performance
Wireless throughput Up to 300 Mbps data rate (real-world throughput will vary)
Recommended user support Up to 16 connected users, or 10 active users.
Configuration
Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Multi-Access Point Management
Single Point Setup Yes
Maximum access points per
cluster
4
Active clients per cluster 40
Management
Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management Yes
Event logging Local, remote syslog, email alerts
Network diagnostics Logging and packet capture
Web firmware upgrade Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration
Protocol (DHCP)
DHCP client
IPv6 host Yes
Wireless
Frequency Single-band 2.4 GHz
Radio and modulation type Single radio, orthogonal frequency division multiplexing (OFDM)
WLAN 802.11n
Operating channels 1 to 13 (depending on country)
Channels 1 through 11 (FCC)
Channels 1 through 13 (ETSI)
Wireless isolation Wireless isolation between clients
External antennas None
Internal antennas Internal fixed PIFA antennas
Antenna gain in dBi 2 dBi each antenna
Transmitted output power
●
802.11b @ 11 Mbps: 17 dBm
●
802.11g @ 54 Mbps: 13 dBm
●
802.11n @ HT20HT40, MCS15: 13 dBm
To Next Page
Loading...
