© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 8
Specifications Description
Internal antennas Internal fixed PIFA antenna
Antenna gain in dBi 2 dBi each antenna
Transmitted output power
●
802.11b @ 11 Mbps: 17 dBm
●
802.11g @ 54 Mbps: 13 dBm
●
802.11n @ HT20HT40, MCS15: 13 dBm
Receiver sensitivity
●
802.11b: 11 Mbps @ –86 dBm
●
802.11g: 54 Mbps @ –71 dBm
●
802.11n: 300 Mbps @ –64 dBm
Wireless Distribution System
(WDS)
Yes
Roaming Yes
Fast roaming 802.11i preauthentication
Active WLAN clients Same as number of users: 32 max connected users, 20 active users recommended
Multiple SSIDs 8
Wireless VLAN map Yes
WLAN security Yes
Wi-Fi Multimedia (WMM) Yes, with automatic power save, and Voice profile
Operating Modes
Access point Access Point mode, WDS bridging, Workgroup Bridge mode
Environmental
Power 12V 1A DC input, and IEEE 802.3af compliant PoE
Certifications FCC class B, CE, IC, Wi-Fi
Operating temperature 0° to 40°C (32° to 104°F)
Storage temperature –20° to 70°C (–4° to 158°F)
Operating humidity 10% to 85% noncondensing
Storage humidity 5% to 90% noncondensing
Mean time between failures
(MTBF)
492281 hours
Package Contents
●
Cisco WAP321 Wireless-N Selectable-Band Access Point with Single Point Setup
●
Ceiling/wall mounting kit
●
User guide on CD-ROM
●
Quick-start guide
●
Ethernet network cable
Minimum Requirements
●
802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
●
Switch/router with PoE support or PoE injector when used with PoE
●
Web-based configuration: Java-enabled web browser
Warranty
Access point Limited lifetime
To Next Page
Loading...
