Cisco WAP351 Factory Reset

Step 2. To reset the device, click the Reboot To Factory Default button.
A Confirm page appears:
Step 3. Click OK.
A Progress Bar appears:
Step 4. After the reboot is completed, login with the default credentials. The default
username is cisco, and the default password is cisco.
Rebooting the Device
There are two ways to reboot the Access Point:
• Hardware reboot
• Reboot with the use of the web configuration utility
Hardware Reboot
Step 1. Press the Power button to turn off the device. After 10 seconds have passed, press

Cisco WAP351 Specifications

General

Brand	Cisco
Model	WAP351
Category	Wireless Access Point
Language	English