Cisco WAP351 Factory Reset

the Power button a second time to power the device back on.
The Access Point reboots.
Reboot with the use of the Web-based utility
Step 1. Log in to the web configuration utility page and choose Administration > Reboot.
The Reboot page opens:
Step 2. To reboot the device, click the Reboot button.
A Confirm page appears:
Step 3. Click OK to continue with reboot.
A Progress Bar appears:

Cisco WAP351 Specifications

General

Brand	Cisco
Model	WAP351
Category	Wireless Access Point
Language	English