Cisco Webex Desk Pro - Activate Do Not Disturb

15435.02 Cisco Webex Desk Pro User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
18
Tap in the upper left corner, as shown.
Your device can be set to not respond
to incoming calls. You can still call
others.
Your video support team may have set
a time-out on this feature, after which
the device responds to incoming calls
as usual. Default time-out setting is
60 minutes.
Note that access to this feature may
have been removed by your video
support team.
About Do Not Disturb
Activate Do Not Disturb
Video Calls
1
Tap Do not disturb to activate the feature. Tap again to deactivate.
2