EasyManua.ls Logo

Cisco WS-G5484 User Manual

Cisco WS-G5484
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Americas Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Gigabit Interface Converter (GBIC) Module and
Small Form-Factor Pluggable (SFP) GBIC Module
Installation Information and Specifications
GBIC Product Numbers: WS-G5484, WS-G5486, WS-G5487, CWDM-GBIC-1470=, CWDM-GBIC-1490=,
CWDM-GBIC-1510=, CWDM-GBIC-1530=, CWDM-GBIC-1550=, CWDM-GBIC-1570=, CWDM-GBIC-1590=,
CWDM-GBIC-1610=
SFP Product Numbers: SFP-GE-F=, SFP-GE-S=, SFP-GE-L=, SFP-GE-Z=, GLC-SX-MM=, GLC-LH-SM=, GLC-ZX-SM=,
GLC-T=, CWDM-SFP-1470=, CWDM-SFP-1490=, CWDM-SFP-1510=, CWDM-SFP-1530=, CWDM-SFP-1550=,
CWDM-SFP-1570=, CWDM-SFP-1590=, CWDM-SFP-1610=.
Revision History Table
The Document Revision History table below, beginning with OL-5007-06, records technical changes to
this document.
Introduction
This document provides information about Gigabit Interface Converter (GBIC) modules and small
form-factor (SFP) GBIC modules on the Cisco 7200VXR routers, the Cisco 7201 router, the Cisco 7301
router, the Cisco 7304 router, the Cisco 7401ASR router, the Cisco 7500 series routers, the Cisco 7600
series routers, the Cisco 10008 router, the Cisco 12000 series routers, and the Cisco uBR7246VXR cable
Document Version Date Change Summary
OL-5067-08 August, 2008 This version adds SFP module SFP-GE-F information.
OL-5067-07 April, 2007 This version adds Cisco 7201 support.
OL-5067-06 December, 2006 This version adds SFP module SFP-GE-S, SFP-GE-L,
and SFP-GE-Z information.
Question and Answer IconNeed help?

Do you have a question about the Cisco WS-G5484 and is the answer not in the manual?

Cisco WS-G5484 Specifications

General IconGeneral
BrandCisco
ModelWS-G5484
CategoryControl Unit
LanguageEnglish

Summary

Revision History

Document Introduction

Related Cisco Documentation

GBIC and SFP Module Overview

GBIC/SFP Module Cabling and Connections

Cisco 1000BASE-T SFP Modules

CWDM GBIC/SFP Module Details

Mode-Conditioning Patch Cord Guide

Installation Prerequisites and Safety

Safety Guidelines for Module Handling

Guidelines for handling GBIC/SFP modules, including ESD prevention, dust sensitivity, and connector cleaning.

FCC Class A Compliance Information

Information on FCC Class A digital device compliance and potential interference in commercial environments.

GBIC/SFP Module Installation and Removal

Third-Party Module Usage Caution

Advice against using third-party GBIC/SFP modules; use only Cisco-supplied modules to prevent system problems.

Removing GBIC or SFP Modules

Steps to disconnect network fiber cables and remove GBIC/SFP modules from the Gigabit Ethernet interface.

Installing a GBIC Module

Installing an SFP Module

Connecting GBIC/SFP Module Interface Cables

Attaching Optical Fiber Cables and Patch Cords

Instructions for attaching fiber optic cables to GBIC/SFP modules and using mode-conditioning patch cords for specific distances.

Fiber-Optic Cleaning Best Practices

Obtaining Cisco Documentation and Support

Related product manuals