To Next PageTo Next Page
Need help?Do you have a question about the Cisco T1 and is the answer not in the manual?
General| Interface Type | T1 |
|---|---|
| Data Rate | 1.544 Mbps |
| Line Coding | AMI/B8ZS |
| Framing | D4/ESF |
| Connector Type | RJ-48 |
| Compliance | ANSI T1.403 |
Provides an overview and lists limitations for T1/E1 interfaces.
Details steps for setting card type and configuring T1/E1 controllers.
Utilizes show commands to verify controller and CEM setups.
Covers performance metrics and setting up CESoPSN.
Explains Bit Error Rate Testing and loopback methods for troubleshooting.
Lists relevant commands and provides additional documentation links.
Guides on configuring and understanding pseudowires for traffic transport.
Details on configuring CEM, classes, payload size, and dejitter buffers.
Specifics for configuring CESoPSN and DS1 local connections.
Lists commands and additional resources for pseudowire configuration.
Lists limitations for the alarm history feature.
Defines the periodicity for saving alarm entries to a file.
Commands to check the alarm history process and log files.
Lists commands and additional resources for alarm history management.
Guidance on feature support and explanation of clock recovery concepts.
Steps for configuring Adaptive and Differential Clock Recovery for SAToP.
Commands to verify the adaptive and differential clock recovery setups.
Details on configuring network clocks and related resources.
Guidance on feature support and explanation of clock recovery for CESoPSN.
Steps for configuring Adaptive and Differential Clock Recovery for CESoPSN.
Commands to verify the adaptive and differential clock recovery setups.
Details on configuring network clocks and related resources.
