11
English
[Measuring time with the chronograph]
1. Press button (A) to change the watch to the chronograph mode.
The second hand stops at the 0 second position and changes to the chronograph
1/20 second hand.
2. Each time button (B) is pressed, the chronograph starts and stops
repeatedly with a confirmation tone.
The chronograph 1/20 second hand stops at the 0 second position in 30 seconds after
starting the chronograph. Subsequently, when button (B) is pressed to stop the chronograph,
the chronograph 1/20 second hand advances rapidly to display the measured time.
3. Press button (A) to reset the chronograph. All hands return to the
0 position.
Using the chronograph
Reset
Time Measurement
Stop
(B)
(B)
(A) (A)
To Next Page
Loading...
