Citizen 3740 - Operating Instructions; Names of Parts; Switching Modes

Time Mode Chronograph Mode Diving Mode
For press Button 1. For press Button 1 continuously for 2 seconds.
1
0m
3
6
9
12
15
30
2
0
4
0
5
0
EXIT
.0
.2
.4
.6
.8
1
ThefunctionhandA
pointstoEXIT.
0m
3
6
9
12
15
30
2
0
4
0
5
0
EXIT
.0
.2
.4
.6
.8
DV
10
20
30
40
50
DV
1
Thefunction
handAand
themodehandB
bothpointto0.
The second hand F
points to 0.
0m
3
6
9
12
15
30
2
0
4
0
5
0
EXIT
D
V
10
20
30
40
50
DV
1
Themode
handB
pointstoDV.
1
1
1
1
1
1
Ｕ：EXIT…ThefunctionhandpointstoEXITintheTimeMode.
Ｖ：OverZoneMark …Thefunctionhandpointstothismark(atthe53minuteposition)at
depthsoverthan50meters(125ft).
Ｗ：DV…"DV"means"diving".ThemodehandpointstoDVwhenintheDivingMode.
Ｘ：CALL…PushingButton2willdisplaythemaximumdepthmemo.
Ｙ：Pressuresensor…Measuresdepthbysensingwaterpressure
Ｚ：Depth reading units…Depth readings are indicated in meters or feet, depending on the model.
A
B
C
D
E
F
G
1
2
:
:
:
:
:
:
:
:
:
Function hand
Mode hand
Minute hand
Crown
Hour hand
Second hand
24-hour time hand
Button 1
Button 2
Name
TimeMode DivingMode
ChronographMode
Always displays minutes
Used to set time and date
Always displays hours
Always displays 24-hour time in conjunction with the hour hand
Used to switch modes, etc.
Used to call Maximum depth and for chronograph measurements, etc.
Points to EXIT
Points to 0
Indicates depth
Points to DV
Chronograph second hand
Chronograph minute hand
Chronograph 1/20 second hand Displays seconds
11
[ Switching modes ]
Switch between the three modes simply by pressing button1
Operating instructions
10
This watch has three modes: Time Mode, Diving Mode, and Chronograph Mode.
[ Names of Parts ]
Please read the instructions below while referring to the foldout
watch diagram located on the opening page of this manual.