43
English
You can adjust the watch by receiving the time signal any time when the time and
date are not correct or the reception result is "NO."
Receiving the time signal manually
(On demand reception)
Ⓐ
0 1 2
S
OK
RX
NO
M
T
W
T
F
S
OK
RX
NO
80
70
1. Ensure that the crown is in position
0
.
2. Press and hold the lower right button
Ⓐ
for
two or more seconds.
The result of the last signal reception is displayed,
then on-demand reception starts. (2-30 minutes)
• The chronograph 1/20 second hand indicates "RX."
• The signal station is different depending on the city
set. Confirm the current city setting.
• You can not perform this operation when using the
chronograph.
To Next Page
Loading...
Need help?
General