45
English
Adjusting the time/calendar manually
Ⓑ
0 1 2
Ⓑ
0 1 2
Manually adjust the time/calendar when the watch cannot receive the time signal.
1. Pull the crown out to position
.
2. Press and hold the upper right button
Ⓑ
for
two or more seconds.
The second hand moves to the 30-second position
and the chronograph minute hand moves to the
60-minute position.
3. Pull the crown out to position
.
The second hand moves to the 0 second position,
and it becomes possible to adjust the time/calendar.
To Next Page
Loading...
Need help?
General