Citizen C023 - Nomenclature and Identification of Watch Parts; Setting the Analog Time; Setting Analog Time

3. Nomenclature and identification of watch parts
4. SETTING THE TIME
Set the Analog (hands) time
•
The crown is a screw down type locking it into place next
to the case to help prevent the entrance of moisture.
To set the analog time, first unscrew the crown in a
counter clockwise motion to release it from the case.
Pull the crown out 1 click and turn to set the current
time.
•
After setting the time, push the crown in one click.
While applying gentle pressure towards the case, turn the
crown in a clockwise motion to lock it onto the case.
Return to Table of Contents
Return to Table of Contents