Citizen CH-453 - Page 14

-
Eng 14
-
Español
English Français
Pyсский
한국어
ةيبرعلا ودرا
MEASURING YOUR BLOOD PRESSURE
• Plug the air hose connector
rmly into the air hose
socket on the main unit, as
illustrated.
➋ Plug the air hose
connector into the main
unit.
➌ Place the cuff at the height of the heart.
➍ Press the START/STOP switch (the blue switch).
* If the pressurization value exceeds 280 mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff deates, and the power turns off.
➀ All digits on the display blink for
approximately one second.
• All digits displayed is an initial
display, indicating that the monitor is
functioning normal.
The
mark will also be displayed
but this does not indicate that the
battery needs to be replaced.
➁ *
is displayed for approximately
one second.
➂ The cuff is pressurized automatically.
Air hose connector
Air hose socket
CH-4531901.indb14 2019/05/3113:45