a. Open battery cover.
b. Refer to the picture in positioning batteries. (Figure No.4)
c. All LCD segments appear on the display in 3 seconds.
d. Display 1month 1 date, 12 hour 0 minute.
9. How to measure
A. Inserting batteries in position:
a. Wrap the cuff around the wrist (Refer to Wrapping of Wrist
cuff as Figure No. 5)
b. Sit upright on the chair to have correct posture. (Refer to
Correct Posture in Taking Blood Pressure as (Figure No. 6)
c. Press" START/STOP "button. All elements display '888'
in 3 seconds. Afterward, displays the updated time. The
measuring blood pressure symbol will ash on the display
and then the air pressure will automatically pump up to
195 mmHg. If blood pressure tends to be on the high
level, the air pressure will automatically increase to the
required level for measurement.
* Do not move or talk in the midst of taking blood pressure
measurement.
d. After the air pressure is increased, it will slowly decrease.
When the pulse rate is detected, HEART RATE symbol
will start ashing.
B. Steps to take blood pressure measurement:
11
To Next Page
Loading...
