Citizen CH605 - To Change Batteries

D. To change batteries:
When " " show up on the display, the battery is weak.
Change the batteries or it will not be possible to take blood
pressure measurement.
All batteries used must be the same type. Do not mix
alkaline, standard(carbon-zinc) or rechargeable (cadmium)
batteries.
Do not mix old and new batteries.
(2) Press " RECALL " button to read the next line of stored
data. The data called up on the display is numbered
accordingly. After reading the recalled data as rotator
48-set of the stored data, press " RECALL " to switch
to normal time.
(3) To discontinue in the midst of reading of the data,
press "START/STOP" button.
c. Erasing data:
(1). Take out the batteries and then rell 2 pcs batteries
again.
(2). Press "RECALL" button, no data should show up on
the screen.
13