Citizen CHU304 - MEASURING YOUR BLOOD PRESSURE; Preparation and Cuff Attachment

- Eng 9 -
English
Español
Français Pyɫɫɤɢɣ
Ǒ¡Ûȣ
2 ATTACHING THE CUFF
Before applying your blood pressure cuff, be sure you have selected the
appropriate size cuff:
Cuff (model: SCN-008) fits arm circumference: 22 cm – 30 cm.
Wide Ragne Cuff (model: SCW-009) fits arm circumference: 22 cm – 42 cm.
1 Plug the air hose connector into
the main unit.
MEASURING YOUR BLOOD PRESSURE
2 Put the cuff around your arm so that the air
hose comes to the palm side.
Metal hoop
1 Unroll the cuff and thread the end through the
metal hoop so that the side with the hook-
and-loop fastener is on the outside.
: The position of the artery.
3 Adjust the position of the cuff so that the air hose is located in the
center of your arm and the hem of the cuff is 1 cm – 2 cm above your
elbow.
* The cuff should be put on the bare arm
or over a light-weight underwear.
* If you wear a heavy-weight top, please
remove it.
1 cm – 2 cm
Air hose
socket
Air hose
connector
• Do not bend the air hose during measurement,
which may cause inflation error, or harmful
injury due to continuous cuff pressure.
00CHU304All.indbEng-92015/06/0211:00:51