Citizen CHU304 - BATTERY MANAGEMENT; Loading the Batteries; Removing the Batteries

- Eng 7 -
English
Español
Français Pyɫɫɤɢɣ
Ǒ¡Ûȣ
(Batteries supplied with the unit should be loaded in compartment before you use
the blood pressure monitor.)
LOADING THE BATTERIES
1 Open the cover of battery compartment.
Pressing the upper part of the battery cover, pull the cover toward you to open.
2 Place batteries in the compartment.
Put the batteries paying attention to the
positive and negative terminal symbols
and .
* If the Blood pressure monitor is left unused for an extended period of
time, the batteries should be removed from the compartment.
Battery cover
Battery compartment
4 “AA” batteries
3 Close the battery cover.
• When the icon is displayed or nothing appears in the display, replace the old
batteries with four new ones. All four batteries should be changed at once.
• Adjust the clock after changing the batteries.
• The data stored in the memory is not deleted by changing the batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than specified.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution’s rules that apply in your country/area.
REMOVING THE BATTERIES
00CHU304All.indbEng-72015/06/0211:00:49