—56—
Nachstehend finden Sie eine Darstellung der einzelnen Speicherschalter.
(Die werksseitigen Einstellungen sind schattiert dargestel lt.)
Schalter Nr. Funktio n OFF ON
MSW1-1 Power ON Info
Val i d Not Send
MSW1-2 Buffer Size
4K bytes 45 bytes
MSW1-3 Busy Conditio n
Full/ Err Full
MSW1-4 Receive Error
Print“?” No Print
MSW1-5 CR Mode
Ignored LF
MSW1-6 Reserved
Fixed —
MSW1-7 DSR Signal
Invalid Valid
MSW1-8 Init Signal
Invalid Valid
MSW2-1 Reserved —
Fixed
MSW2-2 Auto Cutter Invalid
Valid
*1
MSW2-3
Spool Print
Invalid Valid
MSW2-4 Full Col Print LineFeed
WaitData
MSW2-5 Resume aft PE
Next To p
MSW2-6 Reserved
Fixed —
MSW2-7 Reserved
Fixed —
MSW2-8 PNE Sensor
Val i d Invalid
MSW3-1 Resume Cttr Err
Val i d Invalid
MSW3-2 PE signal by PNE Valid
Invalid
MSW3-3 Parallel 31 Pin
Val i d Invalid
MSW3-4 Reserved
Fixed —
MSW3-5 Reserved
Fixed —
MSW3-6 Reserved
Fixed —
MSW3-7 CBM1000 Mod e
Invalid Valid
MSW3-8 Resume Open Err
Close Command
MSW4-1 Reserved
Fixed —
*2
MSW4-1
P.Length Set
Auto Measur e Command
MSW4-2 Reserved
Fixed —
*2
MSW4-2
Power on TOF
Invalid Valid
MSW4-3 Feed&Cut at TOF Invalid
Valid
*2
MSW4-3
Feed&Cut at TOF
Invalid Valid
MSW4-4 Reserved
Fixed —
*2
MSW4-4
Paper Select Thermal Roll
BM P/Lbl P
MSW4-5 Reserved
Fixed —
*2
MSW4-5
Position Detect
Black Mark Label
MSW4-6 Reserved
Fixed —
*2
MSW4-6
Meatsure at Close Invalid
Valid
MSW4-7 Reserved
Fixed —
MSW4-8 Partial Only Invalid
Valid
MSW5-1 Buzzer
Val i d Invalid
MSW5-2 Line Pitch
1/360 1/406
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
To Next Page
Loading...
