Citizen E610 - Connecting to a PC

32
TO CONTENT
• Language: select the language of the system.
• Screen saver: on / o screen saver.
• Reset: Returns all settings to “default.”
3.9 Connecting to a PC
Connect the device to a PC via USB-cable. During the rst
start is to install the driver on your PC. After connecting
the device to a PC on the screen will appear window to
select one of two modes: Data transmission, Battery
charging. Select Data transmission to communicate
with the PC. The device will appear in the le manager
of your PC as an external drive. You can delete les from
the device and copy les from the PC to the device and
vice versa.
Please note!
When downloading les do not disconnect the USB-
cable from device or PC. If the USB-cable is disconnected
while copying, it will lead to loss of les.
Before you disconnect the device from the PC to
convince that all les are copied / removed. Use safety
disconnect Manager on PC before disconnecting the
USB-cable.