34
Receiving the time signal manually (On demand reception)
• For details of signal reception, see “About signal reception” (→ page
42
).
• It takes up to 30 minutes to finish signal reception.
• Signals to receive are different depending on the time zone you set. For details,
see the table on page
19
.
1
Push the crown in to position
0
.
2
Press and hold the lower right button
A
for 2 seconds
or more.
The second hand indicates the result of the last signal
reception.
After that, the second hand points “
RX
” and signal reception
starts.
To Next Page
Loading...
