68
Troubleshooting
Resetting the watch - All Reset
When the watch does not work properly, you can reset all the settings. If the power
reserve is insufficient, charge the watch first.
Be sure to perform the following operations after All Reset.
1
Correct the reference positions.
After All Reset, the watch is in the reference position adjustment
mode. Refer to step 5 and after of “Checking and correcting the
reference position” on page
56
.
2
Set the world time.
See page
21
.
3
Adjust the time and calendar.
When adjusting them by receiving signals manually → page
34
When adjusting them manually → page
49
To Next Page
Loading...
