43
About signal reception
When receiving the time signal
Take off the watch with pushing the crown in to position
0
and place it on a stable
surface where it can receive the signal better, such as next to a window.
• When wire glass is used for the window, open it or change the reception place.
• The reception antenna is located at the 8:00 position of the watch. Place the watch
with the 8:00 position facing toward the station.
• Do not move the watch during time signal reception.
• When the second hand is moving once every two seconds (during insufficient
charge warning), time signal reception is not executed. Charge the watch before
trying reception.
To Next Page
Loading...
