29
8. reference position confirmation method
Radio clock, the reference position of the needle and "0 hours, 0 minutes, 0 seconds" day "one day", and days of the week
"SUN" to the original, and displays the standard time and calendar received.
◎? Please check the reference position is displayed correctly. ? Crown remains in
the normal position, press and hold (B) button for about 5 seconds or more,
the second hand moves in a forward or reverse, away Jimetara. All of the
needle and, calendar is hand movement at high speed, will stop at the
reference position which is stored in the watch.
· There is a case where the maximum take about 7 minutes. In the case other than the displa
y of the correct reference position, refer to "manual correction method of the reference
position" on the next page. ※? If the reference position is correct, press the button (B),?
To return to the original time if vertical 2 minutes as it is.
(B) button
Display of the correct reference position
Time: 0 hours, 0 minutes, 0
seconds Date ?????????: 1
day day of the week ???: SUN
To Next Page
Loading...
