Citizen H144 - Checking and Correcting Reference Position; Understanding the Reference (0) Position

38
Checking and correcting the current reference (0) position
If the time or date is not shown correctly even after proper reception of the time
signal, check whether the reference (0) position is correct or not.
What is the reference (0) position?
The base position for all the hands to indicate
the time and date.
• For the time indication: “0:00:00”
• For the date indication: “1”
If the time and date indications are off from
the correct reference (0) position, the watch
will not indicate the time and date correctly.
Correct reference (0) position