23
• The automatic reception function and recovery automatic reception function cannot be
deactivated.
• Even when this watch receives the time signal successfully, the accuracy of the displayed
time will be dependent on the reception environment and internal processing.
• If the watch is not able to receive the signal, it will operate normally within an accuracy
range of ±15 seconds per month.
When receiving the time signal
Remove the watch and place it on a stable surface where
it can receive the signal better, such as next to a window.
• The reception antenna is located at the 9:00 position
of the watch. Place the watch with the 9:00 position
facing toward the station.
• Do not move the watch during time signal reception.
Notes on the time signal reception
To Next Page
Loading...
