10
Checking the power reserve
1. Ensure that the crown is in position .
2. Press the lower right button
A
briefly.
• When the charge of the watch is
low, the second hand rotates a
quarter counterclockwise.
You need to charge the watch. See
page
32
.
3. Press the lower right button
A
briefly to finish the procedure.
The current time is indicated.
• The current time will be indicated automatically after 10
seconds even without pressing the button.
Crown position
The second hand indicates “OK” or “NO” at the end of this procedure to show the reception
result of the time signal.
To Next Page
Loading...
