12
Setting the city
Select the city for which you want to indicate the time and date.
1. Pull the crown out to position .
The second hand moves and indicates the city currently selected.
2. Rotate the crown to select the city
for which you want to indicate the
time and date.
• For details of the selection of cities, see
pages
13
to
15
.
• Each time you select a city, the time
and date of the city you have selected
will be indicated.
3. Push the crown in to position to
finish the procedure.
The current time is indicated.
Crown position
When “New York” (49
seconds position) is
selected
After setting the city, check the displayed time—Summer Time or standard time. (See pages
26
to
31
.)
To Next Page
Loading...
