4848
The watch may not work properly if it is affected by static electricity
or shock. In this case, you must reset the watch.
Caution
• Be sure to charge the watch fully before resetting it. (Page
34
)
• You must correct the current reference position after resetting
the watch.
After resetting the watch, the settings are changed as follows:
• Calender:
• City:
• Summer time:
1 January (leap year)
London
“OFF” for all cities (automatic switching)
1. Pull the crown out to position .
2. Press the upper and lower right buttons
A
and
B
, then
release them.
The second hand moves to the “0” second position, the hour
hand and date indicator move slightly, and the watch is now
reset.
Resetting the watch
Crown position
Troubleshooting
To Next Page
Loading...
