4746
7. Unique Functions of Solar-Powered Watches
When the watch becomes insufficiently charged, the display changes as shown below.
[Normal Display] [Recovery Automatic Reception]
[Insufficient Charge Warning Display]
When reception is
successful *2
When sufficiently
charged by exposing
the dial (solar cell)
to light *1
If insufficiently
charged state
continues for 6 days
or more
Watch stops
due to being
insufficiently
charged
When the watch becomes insufficiently charged due
to not exposing the dial (solar cell) to light
* 1: If the watch has stopped as a result of being insufficiently charged, a minimum of 30 minutes
are required until recovery automatic reception even if the watch is exposed to light.
* 2: If recovery automatic reception has failed, the watch begins to run after returning to the time
and date when the watch stopped as a result of being insufficiently charged. In this case,
although the second hand moves at one second intervals, since the time is incorrect, first set the
time and date manually or by free reception before using the watch.
When watch becomes
sufficiently charged
2-second interval
movement
To Next Page
Loading...
