3/10
H864 Instruction manual
Checking the power reserve
For details of charging, see “Charging your watch” (page
7
).
1
Push the crown in to position
0
.
2
Press and release the upper right button
B
.
The function hand indicates the power reserve in levels.
3
Press and release the upper right button
B
to finish the procedure.
• The hand returns to normal indication automatically in 10 seconds without pressing
the button.
Indication of power reserve in levels
Level
3 2 1 0
Power
reserve
indication
Duration
(approx.)
180 - 130 days 130 - 70 days 70 - 2 days 2 days
Meaning
Power reserve is
sufficient.
Power reserve is
OK.
Power reserve is
getting low.
Insufficient
charge warning
has started.
OK for normal use
Charge immediately.
• The function hand always indicates power reserve while power reserve level is “1”
or “0”.
World time
This watch can indicate the time around the world according to which of 26 time
zones (offsets from UTC — Coordinated Universal Time) is chosen.
• Signals to receive are different depending on the time zone you set.
Checking the time zone setting
1
Push the crown in to position
0
.
2
Press and release the lower right button
A
.
The second hand indicates the current time zone setting.
Ex: when +9 is set as the time zone
• For time zones and positions of the second hand corresponding to them, see the
table.
3
Press and release the lower right button
A
to finish the procedure.
• The hand returns to normal indication automatically in 10 seconds without pressing
the button.
Changing the time zone setting
1
Pull the crown out to position
1
.
The second hand indicates the current time zone setting.
2
Rotate the crown to select a time zone.
• For time zones and positions of the second hand corresponding to them, see the
table.
• When you chose a different time zone from the current one, the hands and
indication of the watch move corresponding to the new one.
3
Push the crown in to position
0
to finish the procedure.
The watch returns to normal indication.
Correspondence of time zones and positions of the second hands
Second hand position Time zone Area name Signal station
0 0 LON
Germany
2 +1 PAR
4 +2 ATH
◆Germany7 +3 RUH
9 +4 DXB
11 +5 KHI
◆China
14 +5.5 DEL
16 +6 DAC
18 +7 BKK
21 +8 BJS China
23 +9 TYO Japan
25 +9.5 ADL
◆Japan
28 +10 SYD
30 +11 NOU
32 +12 AKL
35 –11 MDY
◆United States37 –10 HNL
39 –9 ANC
42 –8 LAX
United States
44 –7 DEN
46 –6 CHI
49 –5 NYC
51 –4 MAO
◆United States
53 –3 RIO
56 –2 FEN
◆Germany
58 –1 PDL
• Values on the “Time zone” column mean time difference between UTC and the
standard time of time zones.
• Time zones whose “Signal station” has ◆ mark in the table are out of reception
range and cannot receive its signals. switching summer time and standard time
must be executed manually there.
• It may be difficult to receive the time signal properly under certain environmental
conditions which prevent signals to reach.
To Next Page
Loading...
