While
diving
1)
When
starting a dive, the dot display willtell the swimming diver
when
the watch is in
diving
mode.
2) The LED will flash once every 4 seconds to show the watch is in diving mode.
3) The waterdepth is measured and displayedevery second,
the
rangeof water depth
measurement
is
1:0m-
80.0m(4~260ft).
When
the watch is
deeper
than
80.0m(260ft),
it displays "—m"
and
when
shallower
than
1.0m(4ft), it displays u0.0mn;
thus
the
watch
informs you
when
it is outside its depth
measurement
range.
4)
The
diving time display
measures
and displays in 1
second
units up to 29 mins., 59
sees.
When
it
passes
the 30 min. mark,
the
display
changes
to units of 1 min. With a
maximum
measuring
time of 199 mins. After that, the
watch
starts
from 0
sees,
again.
5)
The
water
temperature displays after 1min.
then
it
measures
and
displays the
water
temperature
every
second.
The
water
temperature
range is -5°C to 40°C.
When
it is
out of range, it displays
[°C]
whichindicatesthat are out of range.
6)
While
pressing
®
button
you
can
confirm
normal
time.
Whenyou
release®
button
the
watch
returns
to
the
depth
display
after
1.5secs.
Pressing
©
button
activates
the
lamp
for
a maximumof 10secs.The lampswitchesoff1.5secs after
releasing
(q)
button.
33
To Next Page
Loading...
