Citizen HYPER AQUALAND - Transferring Dive Data to a PC

O. The transfer mode
[This, (unction allowstransferof diving data to a personal computer.]
1.You can change to the transfermode from any mode except the diving mode, by
pressing (M) button for more than 2secs.
2. Inthis mode, you can transferdata to a personal computerby using the commuhica-"
tions unit and a RS-232C direct cable.
3. Compatible computers
IBM PC/AT orany other cpmpatible computer (There aresome computersthat are
not compatible).
4. Log data, including profile data to be transferred:
maximum depth / average depth / dive time / dive month and date / dive number /
dive starttime/ lowestwatertemperature / divecompletedtime.These 8 items plus
depth data forevery 5sec and water temperature data forevery 5min.
5. About each connection:
Be sure to read the "Communications AQUALAND GRAPH USER'S manual" before
you make any connections.
1) Check that the personal computer switch is OFF.
2) Connect the personal computer andthe communications unit with the RS-232C
direct cable.
3) Switchthe personalcomputeron, and startthe aqualandgraph.
45