CITIZEN WATCHES (H.K.) LTD.
http://www.citizen.com.hk
Displayed Cities
Special Functions of Solar-Powered Watches
the
Alarm 1, Alarm 2 and Alarm 3 modes are the same.
Only the alarm tone is different.
(1) When button (C) is pressed for about 2 seconds in
the normal alarm mode display, ON or OFF flashes on
the digital display and the watch enters the correction
state.
• The hour and minute hands move to 12:00 and stop.
(2) The flashing location on the display changes in the
order shown below each time button (C) is pressed.
(3) The flashing location is corrected by pressing button
(A) or (B).
• The display moves forward by 1 each time button (B)
is pressed.
• The display moves back by 1 each time button (A) is
pressed.
• Depressing either button continuously causes the
display to advance rapidly.
(4) The watch returns directly to the normal alarm
display when button (D) is pressed in the correction
state.
• The hour and minute hands return to the time in the
time/date mode.
(C )
hese city names are displayed in each of the
time/date,travel time, alarm 1, alarm 2 and
alarm 3 modes of the standard mode.
• City names are displayed moving in the
direction in which the time difference
increases when button (B) is pressed or city
names are displayed in the direction in which
the time difference decreases when button
(A) is pressed when correcting the city name
in each of the modes.
Setting the Alarm
When the watch has become
insufficiently charged, it changes
from the normal hand display to
the insufficient charge warning
display (the second hand moves at
2- second intervals and "Charge" is
displayed on the digital display).
Recharge the watch by exposing it
to light while referring to "2.
General Reference for Charging
imes" until the function hand
indicates level 5.
* For the details of others features, please refer to your details owners manual or our web site.
To Previous Page
Loading...
