To Next PageTo Next PageWhy has my Citizen JY8078-01L Watch stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen JY8078-01L are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen Watch moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
Introduces the Citizen Eco-Drive radio-controlled watch.
Covers initial checks and setup procedures before operating the watch.
Verifies and corrects the watch hands' alignment to the zero position.
Guides through fundamental watch functions and settings.
Explains how the watch receives and synchronizes with radio time signals.
Describes how the watch indicates its battery charge level.
Details how to switch between the watch's various operational modes.
Guides on setting and switching between home and world time zones.
Explains manual time setting when radio reception is unavailable.
Guides on setting the date, month, and year manually.
Covers the operation and setting of the watch's timer function.
Details the usage of the stopwatch functionality.
Explains how the watch utilizes solar energy for power.
Details watch behavior related to charging, power saving, and warnings.
Addresses common problems and their solutions, especially signal reception.
Covers important warnings regarding water resistance, cleaning, and environment.
General
