E-5
5) +/–
6) X
y
,
7) nPr, nCr
8) x , ÷
9) +, –
Correction
If you have made a mistake when entering a number (but you have not yet
pressed an arithmetic operator key), just press [ CE ] to clear the last entry
then input it again, or delete individual digits by using the backspace key
[ 00
0 ]
(Ex.) : Correct 12385 as 789
Step : press [ CE ] 789
DEG
789.
(Ex.) : Correct 12385 as 123
Step : press [ 00
0 ] twice
DEG
123.
In a series of calculations, you can correct errors in immediate results
by pressing [ON/C] to clear the calculation completely (expect clearing
memory, see page 9).
If you press the wrong arithmetic operation key, just press [ CE ] key
before entering anything else.
Accuracy and Capacity
Accuracy :
1 in 10th digit.
Capacity :
In general, every reasonable calculation is displayed up to 10 digit
mantissa, or 10-digit mantissa plus 2-digit exponent up to 10
99
or integers
between – 9999999999 and 9999999999.
Numbers used as input must be within the range of the given
function. The range for each of the calculator’s functions is given in the
following pages.
Functions Input range
sin x, cos x, tan x Deg
X 4.5 x 10
10
deg
Rad
X 2.5 x 10
8
rad
Grad X 5 x 10
10
grad
however, for tan x
Deg X 90 (2n+1)
Rad X (2n+1)
Grad
X 100 (2n+1)
(n is an integer)
X
y
π
2
To Next Page
Loading...
