E-7
Input
Total of integer, numerator and
denominator must be within 10 digits
(includes division marks)
Result
Result displayed as fraction for
integer when integer, numerator and
denominator are less than 1 x 10
10
nPr, nCr 0
r n, n 9999999999, n,r are integers.
STAT
x 1x10
50
x 1 x 10
100
0
≤ x
2
1 x 10
100
, n, r are integer
_
x
n 0 S n 1 n 0
Range = 1 ~ r, 1
≤ n ≤ r, 80 ≤ r ≤ 20400
DEC 0 ≤ X ≤ 9999999999 (for zero or positive )
– 9999999999
≤ X ≤ – 1 (for negative)
BIN 0 ≤ X ≤ 0111111111 (for zero, positive)
1000000000
≤ X ≤ 1111111111
(for negative)
OCT 0 ≤ X ≤ 3777777777 (for zero or positive)
4000000000
≤ X ≤ 7777777777
(for negative)
HEX 0 ≤ X ≤ 2540BE3FF( for zero or positive)
FDABF41C01
≤ X ≤ FFFFFFFFFF
(for negative)
Overflow / Error conditions
A symbol “ E ” are indicated on the display when any of the following
conditions occur and further calculation becomes impossible. Just press
[ ON/C ] to release those overflow or error indicator and the subsequent
calculation can then be performed.
1) When function calculations are performed with a number exceeding
the input range.
2) When a number is divided by 0.
3) When the [ ( ] key is used more than 15 times in a single expression.
4) When a result (whether intermediate or final) or accumulated total in
memory exceeds the limit. ( 9.999999999 x 10
99
)
5) When more than six pending operations.
Basic calculation
Before performing the following calculation, check to see that your
calculator is in decimal base and floating point display.
a
b
/c
To Next Page
Loading...
