SR17C-E-0716.doc SIZE: 140x75mm SCALE 2:1 2003/10/4
-E11-
4.5 [+/–] [ = ]
DEG
–10.1
(Ex.) : 12 x 2.3 = 27.6
12 x
(–9) = –108
12 [ x ] 2.3 [ = ]
DEG
27.6
9 [+/–] [ = ]
DEG
–108
(Ex.) : 74 ÷ 2.5 = 29.6
85.2 ÷ 2.5
= 34.08
74 [ ÷ ] 2.5 [ = ]
DEG
29.6
85.2 [ = ]
DEG
34.08
Memory Calculations
• Do not set the function mode to “ STAT ” when performing memory
calculation.
• A new number entered into memory by pressing [ XÆM ] repalces
any number previosly stored.
• To clear the memory’s contents, press [ 0 ] [ XÆM ] or [ ON/C ]
[ X
ÆM ] in sequence.
• M appears when a number which is not equal to “ 0 ” is stored in
memory.
• When you press [ XÆM ] after pressing [ MR ], the displayed num-
ber is changed as the contents of the memory.
(Ex.) : (3 – 5) + (56 ÷ 7) + (74 – 8 x 7) = 19
0 [ XÆM ]
DEG
0.
3 [ – ] 5 [ M+ ]
M
DEG
–2.
56 [ ÷ ] 7 [ M+ ]
M
DEG
8.
74 [ – ] 8 [ x ] 7 [ M+ ]
M
DEG
18.
[ MR ]
M
DEG
24.
0 [ XÆM ]
DEG
0.
FUNCTION CALCULATIONS
Sexagesimal ↔ Decimal conversion
(Ex.) : 12ш45’!30” = 12.75833333
12 [ Θ] 4530 [ 2ndF ] [ ]
DEG
12.75833333
(Ex.) : 2.12345 = 2ш7’ 24.42”
2.12345 [ 2ndF ] [ ]
DEG
2.072442
Before performing the following calculation, check to see that your
calculator is fixed at 2 decimal disaply format.
To Next Page
Loading...
Need help?
General
