SR17C-E-0716.doc SIZE: 140x75mm SCALE 2:1 2003/10/4
-E9-
10
x
x < 100
e
x
x ≤ 230.2585092
x
0
≤ X < 1 x 10
100
x
2
x < 1 x 10
50
1/x
1 x 10
–99
≤ x < 1 x 10
100
, X ≠ 0
3
x
x < 1 x 10
100
n !
0
≤ n ≤ 69, n is an integer.
,
x < 1 x 10
100
x
y
x > 0 : –1 x 10
100
< y log x < 100
x = 0 : y
> 0
x
< 0 : y=n, 1/(2n+1), n is an integer.
but –1 x 10
100
< y log x < 100
y
x
x
> 0 : y ≠ 0, -1 x 10
100
<
y
1
log x < 100
x = 0 : y
> 0
x
<0 : y=2n+1, l/n, n is an integer.(nЋ0)
but –1 x 10
100
<
y
1
log x 100
a b/
c
Input
ΚTotal of integer, numerator and denomi-
nator must be within 10 digits (includes division
marks)
Result
ΚResult displayed as fraction for
integer when integer, numerator and
denominator are less than 1 x 10
10
STAT
x < 1 x 10
50
, Σ x < 1 x 10
100
0 ≤Σ x
2
< 1 x 10
100
, 0 ≤ n < 1 x 10
100
: n ≠ 0 ; s : n > 1 ; σ : n > 0
OVERFLOW / ERROR CONDITIONS
A symbol “ E ” is indicated on the display when any of the following
conditions occur and further calculation becomes impossible. Just
press [ ON/C ] to release those overflow or error indicator and the
subsequent calculation can then be performed.
• An intermediate or final calculation result exceed 1 x 10
100
(including memory calculations).
• You try to divide by zero.
• The number of low priority storage levels exceeds 6 in a
parentheses calculation or nesting parentheses exceed 7 in one
level. (Even if the number of levels is within 6, an error might occur
if you are using memories Ka or Kb, or program memories.)
• You try to use [ 2ndF ] [ Ka
x
Æ
k
] or [ 2ndF ] [ Kb
x
Æ
k
] while memories