Citizen U200 - Getting Started; Part Names Overview; Battery Status and Charging; Power Saving Mode

2/3
U200 Abbreviated instruction
Setting the world time
1.
Press and release the lower left button
M
repeatedly to
change the mode to [TME].
• Choose [CAL] to see calendar.
2.
Press and release the upper right button
A
or upper left button
B
repeatedly to choose an area name on the digital display B.
The time or calendar of the chosen area is indicated on the digital display A.
Table of time zones and representative areas
• The time zone in the table is based on UTC (Coordinated Universal Time).
• Countries or regions may change time zones for various reasons.
Time
zone
Area name Representative area
0
UTC
Coordinated Universal
Time
LON
London
+1
PAR
Paris
ROM
Rome
+2 CAI
Cairo
+3 MOW
Moscow
+3.5 THR
Tehra n
+4 DXB
Dubai
+5 KHI
Karachi
+5.5 DEL
Delhi
+6 DAC
Dhaka
+7 BKK
Bangkok
+8
SIN
Singapore
HKG
Hong Kong
BJS
Beijing
Time
zone
Area name Representative area
+9 TYO
Tokyo
+9.5 ADL
Adelaide
+10 SYD
Sydney
+11 NOU
Noumea
+12 AKL
Auckland
–10 HNL
Honolulu
–9 ANC
Anchorage
–8 LAX
Los Angeles
–7 DEN
Denver
–6
MEX
Mexico City
CHI
Chicago
–5
NYC
New York
YMQ
Montreal
–4 SCL
Santiago
–3
BUE
Buenos Aires
RIO
Rio de Janeiro
Switching the summer time and standard time
You can set the summer time for each area. Choose an area name in step 2 of
Setting the time of the digital section
and set to “On” in step 4.
Summer time setting Indication Content
On
Summer time is indicated.
OF (OFF)
The standard time is indicated.
• You cannot set the summer time for “UTC”.
• Choose “OF” in the same step to stop indicating the summer time.
Setting the calendar
The calendar of this watch does not have to be adjusted manually until Thursday,
December 31, 2099 including leap years. (perpetual calendar)
• Press button
M
to cancel setting of the calendar.
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the lower left button
M
repeatedly to
change the mode to [CAL].
2.
Press and release the upper right button
A
or upper left button
B
repeatedly to indicate an area name you want on the digital
display B.
• For area names, refer to
Table of time zones and representative areas
.
3.
Press and hold the upper left button
B
until the month
indication starts to blink on the digital display A.
The calendar becomes adjustable.
• The blinking part is the target to adjust.
4.
Press and release the upper left button
B
repeatedly to change
the target to be set.
• Each time you press button
B
, the target changes as follows:
DateMonth Year
5.
Press and release the upper right button
A
to adjust the time.
• Pressing and holding button
A
changes indication continuously.
6.
Press and release the upper left button
B
to finish the
procedure.
• The day of week is set automatically.
7.
Press and release the lower left button
M
repeatedly to change
the mode to [TME].