Need help?Do you have a question about the Citrix ADC MPX 5500 and is the answer not in the manual?
General| Model | MPX 5500 |
|---|---|
| Category | Application Delivery Controller |
| Form Factor | 1U |
| Memory | 16 GB |
| Platform | Citrix ADC |
| Interfaces | Console Port, USB Port |
| Power Supply | Dual power supplies |
| Network Interfaces | 8x 1G SFP, 2x 10G SFP+ |
| Dimensions (H x W x D) | 1.75" x 17.25" x 24" |
Outlines essential electrical safety practices for appliance installation and maintenance.
Details requirements for the server room, rack, environmental control, and power.
Guides through the physical installation of the appliance into the rack.
Explains how to connect Ethernet, console, and power cables to the appliance.
Describes how to use the setup wizard for initial appliance configuration via web browser.
Explains how to perform initial configuration using the appliance's LCD keypad.
Guides on performing initial configuration using the serial console.
Details how to use DHCP to obtain an IP address for initial remote configuration.
Provides methods to change the administrative user account password for security.
Guides on configuring network settings for the LOM port via GUI or shell.
Explains power control operations like reset, power off, and power cycle via LOM.
Details the procedure to reset the BMC configuration to factory default settings.
Provides instructions for upgrading the LOM firmware on Citrix ADC MPX appliances.
Details the process for upgrading Fortville NIC firmware on supported MPX platforms.
Explains how to securely wipe customer proprietary information before returning the appliance.
To Next Page
