152
In the event of a breakdown
Rear lamps
1. Brake lamps/sidelamps
Type B, P21/5W – 21/5W
2. Direction indicators
Type B, PY21W – 21W (amber)
3. Reversing lamps
Type B, P21W – 21W
4. Foglamps
Type B, P21W – 21W
For more information on types of bulb, refer to
the corresponding section.
High pressure jet wash
When using this type of washer on
stubborn dirt, do not persist on the
headlamps, the lamps and their edges to
avoid damaging their coating and seals.
This procedure requires the use of the spanner
supplied with the tools for changing a wheel.
For more information on changing a
wheel, refer to the corresponding section.
F
Identify the failed bulb then open the rear
doors to 180°.
For more information on the side-hinged
rear doors and in particular on opening
them to 180°, refer to the corresponding
section.
Courtesy lamps
Type A, 12V5W – 5W
Front/Rear
F
Unclip the lens by inserting a thin
screwdriver into the slots at each side side
of the courtesy lamp.
F
Pull out the bulb and change it.
F
Clip the lens in place and ensure that it is
secure.
https://www.automotive-manuals.net/
To Next Page
Loading...
