45
3
Ease of use and comfort
Returning the seat to the sitting position
Before folding it, check that no object is
obstructing the anchorage points and
preventing correct locking of the seats.
Removing the seat
F If necessary, move the front seats forwards
and lower the head restraint.
F Place the seat in fully folded position.
Refer to the "Fully folded" described
earlier.
F
Press the red lever to unlock the front feet.
F
Tilt the assembly by about 45° backwards
without releasing the lever.
F Release the lever.
F
Lift the seat vertically until it abuts with the
anchorages.
F Tilt the seat forwards and then lift it.
Refitting the seat
F Push the red control.
F
Fold the seat to fix the rear anchorage
points.
F Lift the backrest by pulling on the control.
F
Check that the assembly is anchored
properly.
F Tilt the seat 45° forwards.
F Place the hooks between the two bars.
Before folding it, check that no object is
obstructing the anchorage points and
preventing correct locking of the seats.
Following the various operations:
- do not remove a head restraint without
storing it and fixing it to a support,
- ensure that passengers can always
access the seat belts and fasten them
easily,
-
a passenger must not take their seat
without adjusting and fastening the
seat belt.
F
Fold the seat to fix the rear anchorage
points.
F Pull the control to return the backrest to its
initial position.
F Refit the head restraint.
https://www.automotive-manuals.net/
To Next Page
Loading...
Need help?
General
