47
3
Ease of use and comfort
Returning the backrest to the
sitting position
F Release the backrest by pulling the lever,
then return it to its original position.
F Ensure that it has correctly locked into
place.
Placing the seat in the fully
folded position
Returning the seat to the sitting position
Before folding the seat, ensure that:
-
in row 3, no passenger's foot is
obstructing one of the seat anchorages
on the floor,
-
the seat is locked securely on the floor,
-
the seat belt is available for the
passenger.
Modularity of the Row 3 seat
Placing the backrest in the table
position
F Lower the head restraint as far as it will go.
F
Place the seat in the table position.
F
Pull the red strap located behind the seat
to release the feet of the seat from their
anchorage on the floor.
F
Tilt the entire seat forwards.
F
Unfold the entire seat.
Returning the backrest to the
sittting position
F Unlock the backrest by pulling the control
and then return it to its initial position.
F Check that the assembly is anchored
properly.
Placing the seat in the portfolio
position
F Use the control to fold the backrest onto the
seat.
F
Change to the table position.
https://www.automotive-manuals.net/
To Next Page
Loading...
