49
3
Ease of use and comfort
Ensure that the centre seat belt is stowed
correctly in its housing in the headlining.
Operating the row 2 seats
Removing the seat
Retting the seat
The label on the seat indicates the position in
which it must be installed.
F
Pull the red strap to place the seat in the
fully folded position.
F Tilt the entire seat forwards.
F
Exit via the side door.
F
If necessary, move the front seats forward.
F
Lower the head restraint.
F
Place the seat in the fully folded position.
F
Tilt the entire seat forwards then lift it.
Ensure that no object or foot of a
passenger seated in the rear is obstructing
the anchorage points or preventing correct
locking of the seat.
Operating the
Row 3 seats
Removing the seat
F Place the hooks of the feet between the two
bars.
F Fold the seat back to secure the rear
anchorage points.
F Operate the control to raise the seat
backrest to its initial position.
F Raise the head restraint.
https://www.automotive-manuals.net/
To Next Page
Loading...
