51
3
Ease of use and comfort
Placing the seat in the fully folded position
F If necessary, move the front seats forward
and fasten the central seat belt.
F Check that the straps and loops of the seat
belts are properly placed along the side
panels, so that the sliding of the backrest is
not obstructed.
F Release the backrest by pulling the
control
A.
F
With the same hand, fold the backrest and
associated grille onto the seat.
F
Grab the red strap (like a handle) and lift
the assembly vertically, supporting the
movement until in the fully folded position.
The raised seat is supported on the backrests
of the seats in row 1.
Returning the seat to the sitting position
F In a single movement, take hold of the red
strap and pull the assembly horizontally and
backwards. Support the movement until the
feet of the bench seat lock into the floor.
F Straighten the backrest. The control A
unlocks automatically.
F Check that the bench seat, returned to the
sitting position, is locked correctly on the
floor.
Do not let the assembly drop abruptly.
https://www.automotive-manuals.net/
To Next Page
Loading...
Need help?
General
