CITROEN C 3 2020 - DAB (Digital Audio Broadcasting) Radio; Media

153
CITROËN Connect Radio
11
Select the "Tone", "Balance", "Sound",
"Voice" or "Ringtones" tab to congure
the sound settings.
Press the back arrow to conrm.
In the "Tone" tab, the Ambience, Bass,
Medium and Treble sound settings are
di󰀨erent and independent for each audio
source.
In the "Balance” tab, the All passengers,
Driver and Front only settings are common
to all sources.
In the "Sound” tab, activate or deactivate
"Volume linked to speed", "Auxiliary input"
and "Touch tones".
The balance/distribution (or spatialisation
with the Arkamys
©
system) uses audio
processing to adjust the sound quality
according to the number of passengers in the
vehicle.
Onboard audio: Arkamys Sound Staging
©
optimises the sound distribution inside
the passenger compartment.
DAB (Digital Audio
Broadcasting) radio
Terrestrial Digital Radio
Digital radio provides higher quality sound.
The various "multiplexes/ensembles" o󰀨er a
choice of radio stations organised in alphabetical
order.
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
Press "Band" to select "DAB band".
Press in the shaded area to conrm.
FM-DAB Follow-up
"DAB" does not cover 100 % of the country.
When the digital radio signal is poor, the
"FM-DAB Follow-up" enables you to continue
listening to the same station by automatically
switching to the corresponding "FM" analogue
station (if there is one).
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
Activate/deactivate "FM-DAB Follow-up".
Press in the shaded area to conrm.
If "FM-DAB Follow-up" is activated, there
may be a time o󰀨set of a few seconds
when the system switches to "FM" analogue
radio, and in some cases a change in volume.
When the digital signal quality is restored, the
system automatically changes back to "DAB".
If the "DAB" station being listened to is
not available on "FM", or if "FM-DAB
Follow-up" is not activated, the sound will cut
out while the digital signal is too weak.
Media
USB port
Insert the USB memory stick into the USB
port or connect the USB device to the
USB port using a suitable cable (not supplied).
To protect the system, do not use a USB
hub.
The system builds playlists (in temporary
memory); this operation can take from a
few seconds to several minutes at the rst
connection.
Reduce the number of non-music les and the
number of folders to reduce the waiting time.