CITROEN C 3 2020 - Page 183

181
CITROËN Connect Nav
12
Onboard audio: Arkamys Sound Staging
©
optimises the sound balance/distribution
inside the passenger compartment.
Conguring proles
As a safety measure and because it
requires the sustained attention of the
driver, the operations must only be done with
the vehicle stationary.
Press Settings to display the main page.
Press the "OPTIONS" button to access the
secondary page.
Select "Setting of the proles".
Select "Prole 1", "Prole 2", "Prole 3” or
"Common prole".
Press this button to enter a name for the
prole using the virtual keypad.
Press "OK" to conrm.
Press this button to add a photograph to
the prole.
Insert a USB memory stick containing the
photograph in the USB socket.
Select the photograph.
Press "OK" to accept the transfer of the
photograph.
Press "OK" again to save the settings.
The location for the photograph is
square; the system reshapes the original
photograph if in another format.
Press this button to reset the selected
prole.
Resetting the selected prole activates
the English language by default.
Select a "Prole" (1 or 2 or 3) to link the "Audio
settings" with it.
Select "Audio settings".
Select "Ambience".
Or
"Position".
Or
"Sound".
Or
"Voice".
Or
"Ringtone".
Press "OK" to save the settings.
Modifying system settings
Press Settings to display the main page.
Press the "OPTIONS" button to access the
secondary page.
Select "Screen conguration".
Select "Animation".
Activate or deactivate: “Automatic
scrolling”.
Select "Brightness".
Move the slider to adjust the brightness of
the screen and/or the instrument panel.
Press Settings to display the main page.
Press the "OPTIONS" button to access the
secondary page.
Select "System settings".
Select "Units" to change the units of distance,
fuel consumption and temperature.
Select "Factory settings" to restore the initial
settings.
Returning the system to factory settings
activates the English language by
default.
Select "System info" to display the versions of
the various modules installed in the system.
Selecting the language
Press Settings to display the main page.
Press the "OPTIONS" button to go to the
secondary page.
Select "Languages" to change the
language.