If you have a twin card it is necessary,
on fi rst installation or when updating your
your mobile telephone, then to transfer
the information on it into the NaviDrive
directory. See the Main Menu for the
NaviDrive can definitively memorise the
code of a SIM card. This memorisation
having been accepted, your
required only once, at the fi rst entry.
code using the buttons on
, then validate by pressing
After three errors in trying to enter the code,
your telephone will be blocked. You will
then have to enter your deblocking code
The PUK code is supplied with your SIM
card by your service provider. The PUK code
tolerates 10 successive errors. After this the
SIM card will be un-usable.
All the essential types of information asso-
viewed on the multifunction screen..
WHAT IS THE TELEPHONE FUNCTION
The telephone function consists of a GSM
telephone incorporated in NaviDrive.
The GSM telephone has a “
function, provided by a microphone located
in the front interior lamp, and controls at the
steering wheel giving you access to most of
As with any mobile telephone, your vehicle
telephone operates on the existing cellular
and terrestrial networks, and so a connection
cannot be guaranteed on every occasion.
Do not allow yourself to be distracted while
you are driving. Observe the national leg-
islation currently in force. We recommend
the driver to stop the vehicle to continue a
telephone conversation or to perform cer-
tain actions (selecting a number manually,
INSERTING AND REMOVING THE SIM
by pressing with the point
of a pencil, or similar, on the opening just
. Next, insert your SIM card into
the aperture (as indicated on the card) then
You should only remove the SIM card
after NaviDrive has stopped (key in
(Steering lock) and the display
T EL E P H O N E A N D T E L E M AT I C S E R V I C ES
MULTIFUNCTION SCREEN DISPLAY
When you are not engaged on a telephone
call, the display tells you if you have voice
messages or text messages (SMS) incoming,
the length of connection since the last reset
to zero and the status of your telephone.
During a telephone call, it tells you the time
that has elapsed since the start of the call, as
well as the number (if this option and service
is available) or the name (if recorded in the
directory) of the person you are speaking
with, and the status of your telephone.