The tools are installed under the boot
fl oor.
For access to them:
open the boot,
remove the boot fl oor,
lift up the boot carpet,
remove the box containing the
tools,
remove the polystyrene storage box.
All of these tools are specifi c to your
vehicle. Do not use them for other
purposes.
1. Wheelbrace.
For removal of the wheel trim and
removal of the wheel fi xing bolts.
2. Jack with integral handle.
For raising the vehicle.
3. "Bolt cover" tool.
For removal of the bolt protectors
(covers) on alloy wheels.
List of tools
Other accessories
6. Removable towing eye.
Refer to the paragraph "Towing the
vehicle".
Access to the tools
Wheel with trim
When removing the wheel , fi rst
detach the trim using the wheel-
brace 1 pulling at the valve pas-
sage hole.
When refi tting the wheel , refi t the
trim starting by placing its notch fac-
ing the valve and press around its
edge with the palm of your hand.
4. Centring guide.
For refi tting an alloy wheel to the
hub.
5. Socket for the security bolts
(located in the glove box).
For adaptating the wheelbrace to
the special "security" bolts.
Procedure for changing a faulty wheel
for the spare wheel using the tools
provided with the vehicle.
To Next Page
Loading...
